EFFECT OF DEPOSITION TIME OF POTASSIUM PERMANGANATE NANO THIN FILMS ON EDDY CURRENT REDUCTION IN TRANSFORMER CORES

Main Article Content

Francis, Victor Akoma
Nwabuzor, Peter Onyelukachukwu
Sofolabo, Adekunle Oyemade

Abstract









This study looks at using potassium permanganate (KMnO₄) thin films, made through electrochemical methods, as a substitute for laminating transformer cores on soft iron materials. The study aimed to describe the electrical and crystal properties of KMnO₄ films after they were deposited for different lengths of time (from 5 to 20 minutes) and to compare the results with a control made of silicon iron steel. Four samples of KMnO₄ (X1,X2,X3 & X4) were deposited at different intervals (5,10,15 & 20) minutes respectively. Characterization of the deposited films with X-ray diffraction (XRD) validated the crystalline structure of KMnO₄ nanoparticles, demonstrating consistent peak positions at 2θ angles of 45.2° and 65.4° across the various deposition times, with d-spacing values of 1.96 A and 1.42 A , respectively. The Result showed that sample X4 (the Sample with the highest deposition time of 20minutes) has the strongest intensity count of 26.61, indicating that longer deposition time increases the intensity, which in turn enhances crystallinity, alignment, and stable crystal size within the thin film. Similarly, electrical investigation showed that increasing the deposition time of KMnO₄ films improves resistivity and reduces conductivity, resulting in a reduction in eddy current losses and increased energy efficiency.






 



Downloads

Download data is not yet available.

Article Details

Section

Original Research Article

How to Cite

Akoma, F. V., Onyelukachukwu, N. P., & Oyemade, S. A. (2026). EFFECT OF DEPOSITION TIME OF POTASSIUM PERMANGANATE NANO THIN FILMS ON EDDY CURRENT REDUCTION IN TRANSFORMER CORES. Frontline Professionals Journal, 2(7), 28-39. https://fpjournal.com.ng/index.php/home/article/view/70

References

Al-Bataineh, Q. M., Aljarrah, I. A., Ahmad, A. A., Alsaad, A. M., & Telfah, A. (2022). Investigation of the doping mechanism and electron transition bands of PEO/KMnO4 complex composite films. Journal of Materials Science: Materials in Electronics, 33(17), 14051–14062. https://doi.org/10.1007/s10854-022-08336-0

Ali, A., Žafar, H., Žia, M., ul Haq, I., Phull, A. R., Ali, J. S., & Hussain, A. (2016). Synthesis, characterization, applications, and challenges of iron oxide nanoparticles. Nanotechnology, Science and Applications, Volume 9, 49–67. https://doi.org/10.2147/nsa.s99986

Arritt, R., & Dugan, R. (2008). Distributed generation interconnection transformer and grounding selection. In Power and Energy Society General Meeting, IEEE (pp. 1–6). IEEE. https://doi.org/10.1109/PES.2008.4596772

Cullity, B. D., & Smoluchowski, R. (2014). Elements of X-Ray Diffraction. Physics Today, 10(3), 50–50. https://doi.org/10.1063/1.3060306

Fernández, I., Ortiz, A., Delgado, F., Renedo, C., & Pérez, S. (2013). Comparative evaluation of alternative fluids for power transformers. Electric Power Systems Research, 98, 58–69. https://doi.org/10.1016/j.epsr.2012.11.006

Frljić, S., Trkulja, B., & Žiger, I. (2021). Calculation of the eddy current losses in a laminated open-type transformer core based on the A, T−A formulation. Applied Sciences, 11(23), 11543. https://doi.org/10.3390/app112311543

Kaur, S., & Kaur, D. (2019). Analysis of effect of core material on the performance of single phase transformer using FEM. IOP Conference Series: Materials Science and Engineering, 561(1), 012129. https://doi.org/10.1088/1757899X/561/1/012129

Kumar, S., Islam, T., & Raina, K. K. (2017). Modelling of breather for transformer health assessment. IET Science, Measurement & Technology, 11(2), 194–203. https://doi.org/10.1049/iet-smt.2016.0259

Dulmaa, A., Cougnon, F. G., Dedoncker, R., & Depla, D. (2021). On the grain size-thickness correlation for thin films. Acta Materialia, 212, 116896. https://doi.org/10.1016/j.actamat.2021.116896

Ho, M.-Y., Gong, H., Wilk, G. D., Busch, B. W., Green, M. L., Voyles, P. M., Muller, D. A., Bude, M., Lin, W. H., See, A., Loomans, M. E., Lahiri, S. K., & Räisänen, P. I. (2003). Morphology and crystallization kinetics in HfO₂ thin films grown by atomic layer deposition. Journal of Applied Physics, 93(3), 1477–1481. https://doi.org/10.1063/1.1534381

Francis et al., (2025). Frontline Professionals Journal, 2(7), 28–39, EISSN 1596-0501

Kate, R. S. (2022). Spray pyrolysis: Approaches for nanostructured metal oxide films in energy storage application. https://www.academia.edu/105619304/Spray_pyrolysis_Approaches_for_nanostructured_metal_oxide_films_in_energy_storage_application

Ko, H., Sin, D. H., Kim, M., & Cho, K. (2017). Predicting the Morphology of Perovskite Thin Films Produced by Sequential Deposition Method: A Crystal Growth Dynamics Study. Chemistry of Materials, 29(3), 1165–1174. https://doi.org/10.1021/acs.chemmater.6b04507

Olivares-Galván, J. C., Georgilakis, P. S., & Ocon-Valdez, R. (2009). A Review of Transformer Losses. Electric Power Components and Systems, 37(9), 1046–1062. https://doi.org/10.1080/15325000902918990

Ye, Ž., Yu, W., Gou, J., Tan, K., Ženg, W., An, B., & Li, Y. (2020). A Calculation Method to Adjust the Short-Circuit Impedance of a Transformer. IEEE Access, 8, 223848–223858. https://doi.org/10.1109/ACCESS.2020.3042983

Patterson, A. L. (2019). Homometric Structures. Nature, 143(3631), 939–940. https://doi.org/10.1038/143939b0

Robertson, J. H. (2012). Elements of X-ray diffraction by B. D. Cullity. Acta Crystallographica Section A, 35(2), 350–350. https://doi.org/10.1107/s0567739479000917

Theraja, B. L. (2005). A textbook of electrical technology: Volume I (Basic electrical engineering) (Reprint ed.). S. Chand Publishing.

Wasan, R. S., Nada, M. S., Wesam, A. T., & Mohammed, A. (2012). Advances in Materials Physics and Chemistry, 11(2).

Wu, X., Li, H., Cheng, K., Qiu, H., & Yang, J. (2019). Modified graphene/polyimide composite films with strongly enhanced thermal conductivity. Nanoscale, 11(17), 8219–8225. https://doi.org/10.1039/c9nr02117e

Ye et al. (2020). A calculation method to adjust the short-circuit impedance of a transformer, which discusses short-circuit impedance related to insulation challenges in transformers.

Yu, W., Ye, Ž., Gou, J., Tan, K., Cai, J., & Luo, J. (2020). Effects of iron core materials on a single-phase power transformer during out-of-phase synchronisation in MicroGrid. In 2020 IEEE 4th Conference on Energy Internet and Energy System Integration (EI2) (pp. 1593–1598). IEEE. https://doi.org/10.1109/EI250167.2020.9347065

Similar Articles

You may also start an advanced similarity search for this article.